Pen-Ray® Power Supplies

Pen-Ray® Power Supplies

Made specifically for the Pen-Ray® Lamps, these power supplies provide proper voltage and current for starting and operating the lamps.

Applications


• Pen-Ray Lamps

Main Features


  • Pen-Ray Lamps operate on an AC current. For certain systems it may be desirable to operate the lamp at higher frequencies than 60 Hz
  • Pen-Ray Lamps can operate satisfactorily at frequencies from 50 Hz to 38 kHz
  • Mating recommendations are available to provide optimum energy output from, and maximum life span of, the Pen-Ray Lamps

Open Power Supply

PS-5, PS-6 and PS-10 DC power supplies are designed as open power supplies with no housing. They are designed for placement in other units. The power supplies feature a standard lamp current shown in the chart below. To order a different current, contact UVP's offices. The power supplies can be ordered with a setting in the following ranges: PS-5 15-28mA, PS-6 and PS-10 15-48mA.

Specifications


For power supply specifications, refer to the Part Numbers tab.

Options


Ordering Information


Pen-Ray Power Supplies
Part Number (Model)
Primary Voltage
Secondary Open
Circuit Voltage (RMS)
Lamp Current
(Nominal)
L x W x H
Dimensions
AC Input Power Supplies
99-0055-01 (PS-1) 115V/60Hz
99-0055-02 (PS-1) 220V/50Hz
2300 Vac 18 mA 6.5 x 3.7 x 2.3"
(165 x 94 x 58mm)
99-0064-01 (PS-11) 115V/60Hz
99-0064-02 (PS-11) 220V/50Hz
2300 Vac 18 mA 5.2 x 3.6 x 2.2"
(132 x 91 x 56mm)
99-0056-01 (PS-2) 115V/60Hz
99-0056-02 (PS-2) 220V/50Hz
2000 Vac 6 mA 6.5 x 3.7 x 2.3"
(165 x 94 x 58mm)
99-0057-01 (PS-3) 115V/60Hz
99-0057-02 (PS-3) 220V/50Hz
2100 Vac 10 mA 6.5 x 3.7 x 2.3"
(165 x 94 x 58mm)
99-0004-01 (PS-4) 115V/60Hz
99-0004-02 (PS-4) 220V/50Hz
2800 Vac 26 mA 6.0 x 4.9 x 3.7"
(152 x 124 x 94mm)
99-0033-01 (PS-9) 115V/60Hz
99-0033-02 (PS-9) 220V/50Hz
2400 Vac 48 mA 6.0 x 4.9 x 3.7"
(152 x 124 x 94mm)
40-0062-01 (PS-8) 115V/60Hz
40-0062-02 (PS-8) 220V/50Hz (Transformer Only)
6000 Vac 30 mA 10.1 x 4.0 x 3.4"
(256 x 102 x 86 mm)
DC Input Power Supplies
44-0002-01 (PS-7) 12VDC/30kHz
(Open Frame Board)
1200 Vac 10 mA 1.1 x 2.2 x 0.65"
(28 x 56 x 17 mm)
99-0077-01 (PS-5) 12VDC/38KHz (Open Frame Board) 3500 Vac 18 mA 3.85 x 3.5 x 1.5"
(98 x 89 x 38 mm)
99-0065-01( PS-6) w/o timer 24VDC/38KHz 3500 Vac 28 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0065-02 (PS-6) w Timer 24VDC/38KHz 3500 Vac 18 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0065-03 (PS-6) w/o Timer 24VDC/38KHz 3500 Vac 18 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0065-04 (PS-6) w Timer 24VDC/38KHz 3500 Vac 10 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0065-05 (PS-6) w/o Timer 24VDC/38KHz 3500 Vac 10 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0065-06 (PS-6) w Timer 24VDC/38KHz 3500 Vac 6 mA 4.8 x 4.3 x 2.0"(
122 x 109 x 51mm)
99-0065-07 (PS-6) w/o Timer 24VDC/38KHz 3500 Vac 6 mA 4.8 x 4.3 x 2.0"
(122 x 109 x 51mm)
99-0076-01 (PS-6) 24VDC/38KHz (Open Frame Board) 3500 Vac 18 mA 3.85 x 3.5 x 1.5"
(98 x 89 x 38 mm)


* All the power supplies are RoHS compliant. PS-8 is a high-voltage transformer only and its housing can be provided at customer request. The DC input power supplies feature high-frequency operation and standard lamp currents as designated above. To order a power supply with a different output current, contact UVP's offices. The current setting is available in the range of 5-48mA for the DC power supplies.